This product is a very cost-effective servo motor controller. It can control up to 32 servo motors to coordinate actions, with position control and speed control. You can use a PC as an upper computer to control through software, or you can add other modules to work offline.
By operating the upper computer software of the PC to transfer the control instruction signal to the controller, the multi-channel servo motor can be controlled individually or simultaneously. It can also be used in combination with a microprocessor with a serial port as a host computer. The control instructions are simplified, the control corner accuracy is high, the baud rate can be changed in real time, the volume is small, and the weight is light. The main controller of the degree manipulator.
With the continuous progress of China''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s machinery industry, universities and colleges have successively opened machinery innovation courses and competitions. Students can apply them to various mechanical innovation works to optimize The control system participates in the competition.
1. This product uses a high-performance, low-power 8-bit AVR? Microprocessor, instruction execution time is a single clock cycle, fast speed, high control accuracy, and stronger I/O port drive capability, which is better than AT51 and STC51 series Single chip microcomputer
2. The anti-interference PCB layout and double-sided patch design greatly reduce the size of the controller and reduce the overall weight of the robot;
3. The USB power design is convenient for debugging, and it can be directly connected to the USB interface of a laptop or desktop computer;
4. Four commonly used baud rates can be selected through the DIP switch, avoiding the loss of the jumper cap and causing abnormal communication. The large-span baud rate value makes the host computer more widely available. You can choose 51, AVR, PIC, DSP and other single-chip microcomputers or Basic Stamp, Arduino as the host computer, many advantages are obvious.........
1. The power supply range of the control part terminal: +7V—+12V.
2. DC plug power supply range of the control part: USB power supply or DC DC 5V power supply.
3. Servo motor terminal power supply range: +4-+6V.
4. Control channel: 32 channels.
5. Communication input: RS232(Serial port)Or TTL.
6. Servo motor drive resolution: about 1us, about 0.09 degrees.
7. Baud rate setting: 2400 9600 38.4k 115.2k can be converted.
8. Supported servo motors: Futaba or Hitec and domestic brands such as Fraser.
9. PC interface: DB9F.
10. Size: 65mm×60mm×1.5mm.
11. Control mode: serial port accepts commands.(Comes with host computer softwareDevice control or microprocessor with serial port)
12. Others: Provide power supply interface for external expansion host computer system.